576 lines
14 KiB
OpenSCAD
576 lines
14 KiB
OpenSCAD
|
|
include <BOSL2/std.scad>;
|
|
include <BOSL2/beziers.scad>;
|
|
include <BOSL2/rounding.scad>;
|
|
include <BOSL2/skin.scad>;
|
|
include <BOSL2/threading.scad>;
|
|
|
|
include <DotScad/src/bend.scad>;
|
|
include <DotScad/src/bend_extrude.scad>;
|
|
//include <DotScad/src/bezier_curve>;
|
|
include <DotScad/src/ellipse_extrude.scad>;
|
|
include <DotScad/src/loft.scad>;
|
|
|
|
include <scad-utils/morphology.scad>;
|
|
include <common.scad>;
|
|
|
|
include <./lib/chinook.scad> // US Box
|
|
include <./lib/finbox_us.scad> // US Box
|
|
|
|
|
|
// https://github.com/BelfrySCAD/BOSL2/wiki/Tutorial-Beziers_for_Beginners
|
|
// ideas offset_stroke
|
|
|
|
/**
|
|
* Kitesurf Fins mold
|
|
*
|
|
*
|
|
*
|
|
* Requirements :
|
|
* - The plunger normaly should be twice the height of the part
|
|
*
|
|
*/
|
|
|
|
/************************************************/
|
|
/* Parameters */
|
|
/************************************************/
|
|
|
|
/* [Fin Specs] */
|
|
|
|
// Height
|
|
fin_height = 254; // 10 inches in mm
|
|
// Top Width
|
|
fin_width = 270; // Width at the top in mm
|
|
// Base Width
|
|
fin_base = 130; // Width at the base in mm
|
|
|
|
|
|
// Define top point
|
|
fin_top_withdraw = 35;
|
|
fin_edge_withdraw = 20;
|
|
|
|
fin_start_angle = 70; // Angle [Point 0 ]
|
|
fin_sweep = 25; // Sweep Angle [Point 1]
|
|
|
|
fin_edge_angle = 30;
|
|
fin_edge_strength = 30;
|
|
|
|
fin_counter_angle = 30; // counter angle [Point 2]
|
|
fin_counter_strength = 10; // Length [Point 2]
|
|
|
|
// Length at the base in mm
|
|
|
|
|
|
|
|
fin_width_tip = 5; // Width at the tip in mm
|
|
fin_thickness = 9; // Thickness of the fin in mm
|
|
|
|
fin_end_angle = 110;
|
|
fin_end_strength = 30;
|
|
|
|
// Back
|
|
fin_back_height = 30; // Percent height
|
|
fin_back_widthdraw = 20; // Percent height
|
|
fin_back_angle = 20; // back angle
|
|
fin_back_strength=30;
|
|
|
|
/* [Base Specs] */
|
|
|
|
base_tickness=8;
|
|
base_extra_thickness=20;
|
|
|
|
|
|
// ---------------------*/
|
|
/* [Mold] */
|
|
// ---------------------*/
|
|
|
|
// Mold base height
|
|
mold_base_height = 10;
|
|
mold_top_height = 5;
|
|
mold_extra_width = 15;
|
|
|
|
mold_piston_height = 10;
|
|
|
|
resin_escape_diameter = 4;
|
|
|
|
// Diameter for screw holes in mm
|
|
merge_holes_diameter = 6;
|
|
piston_depth = 5;
|
|
|
|
skirt_angle=80;
|
|
|
|
// ---------------------*/
|
|
/* [US Box] */
|
|
// ---------------------*/
|
|
/* [US Box] */
|
|
// Dimensions in mm
|
|
//length = 180;
|
|
//length=fin_base;
|
|
|
|
box_thickness = 9.6;
|
|
height = 25;
|
|
thick = 9.2;
|
|
mirror_vec = [1,1,0];
|
|
|
|
//screw_pos = 0.0096*1000;
|
|
screw_pos = 9.6;
|
|
//screw_dia = 0.0045*1000;
|
|
screw_dia = 4.5;
|
|
|
|
//tab_height = 0.013*1000;
|
|
tab_height = 13;
|
|
tab_length = screw_pos * 2;
|
|
tab_round = tab_height;
|
|
|
|
// real pin: d=0.0048 -> drill to fit
|
|
//pin_dia = 0.003*1000;
|
|
pin_dia = 3;
|
|
//pin_depth = 0.0164*1000;
|
|
pin_depth = 16.4;
|
|
//pin_back = 0.009*1000;
|
|
pin_back = 9;
|
|
|
|
// Thickness to cut for easier sliding (0 for no cut)
|
|
//thick_cut = 0.001*1000;
|
|
thick_cut = 1;
|
|
|
|
// ---------------------*/
|
|
/* [Debugging] */
|
|
// ---------------------*/
|
|
|
|
// Showing all layers
|
|
show_debug_layers = false;
|
|
|
|
show_curve_points = false;
|
|
|
|
// Draw master profile
|
|
draw_profile = false;
|
|
|
|
// ---------------------*/
|
|
/* [Rendering] */
|
|
// ---------------------*/
|
|
|
|
// Rendering parts
|
|
build_fin = false;
|
|
build_box = false;
|
|
build_mold = true;
|
|
|
|
parts = "all"; // [all, top, bottom]
|
|
|
|
|
|
mold_part = "all"; // [all, top, bottom]
|
|
// Scaling
|
|
scale_factor = 1.0; // [0.1:0.1:2]
|
|
|
|
// Printable rendering
|
|
printable = true;
|
|
|
|
$fn=64;
|
|
|
|
/*************/
|
|
/* Constants */
|
|
/*************/
|
|
/* [Hidden] */
|
|
// Define the offset value as a constant
|
|
OFFSET = 0.01;
|
|
CLEARING = 0.1;
|
|
INCH=2.54;
|
|
X=0;
|
|
Y=1;
|
|
Z=2;
|
|
|
|
/************************************************/
|
|
/* Derived variable */
|
|
|
|
mold_width = fin_height +2 * mold_extra_width;
|
|
mold_length = fin_width +2 * mold_extra_width;
|
|
mold_height = mold_base_height;
|
|
|
|
drilling_length = mold_base_height+mold_piston_height+2*OFFSET;
|
|
|
|
start = [ 0 ,0 ];
|
|
top_point = [ fin_width-fin_top_withdraw,fin_height ];
|
|
edge_point = [ fin_width ,fin_height-fin_edge_withdraw ];
|
|
counter_edge_point = [ fin_width -70 ,fin_height-100 ];
|
|
tail_point = [ fin_width -95 ,fin_height-175 ];
|
|
end_point = [ fin_base ,0 ];
|
|
|
|
|
|
|
|
/******************/
|
|
/* Profile points */
|
|
/******************/
|
|
points = flatten([
|
|
// *****************
|
|
// INITIAL POINT
|
|
// *****************
|
|
bez_begin(start,70,80),
|
|
// *****************
|
|
// TOP POINT
|
|
// *****************
|
|
bez_tang(top_point,0,80,15),
|
|
// *****************
|
|
// EDGE POINT
|
|
// *****************
|
|
bez_tang(edge_point,-90,15),
|
|
// **********************
|
|
// COUNTER EDGE POINT
|
|
// **********************
|
|
bez_tang(counter_edge_point,-120,30),
|
|
// *****************
|
|
// TAIL Point
|
|
// *****************
|
|
bez_tang(tail_point,-120,40),
|
|
// *****************
|
|
// END POINT
|
|
// *****************
|
|
bez_end(end_point,75,40),
|
|
]);
|
|
|
|
profile_curve_with_base = translate_path( addBase(asCurve(points,32)),-fin_base/2,0 );
|
|
profile = translate_path( asCurve(points,32),-fin_base/2,0 );
|
|
|
|
//profile_curve_with_base = translate_path( asCurve(points,32),-fin_base/2,0 );
|
|
//profile_curve_with_base = resample_path(translate_path( asCurve(points,32),-fin_base/2,0 ),64);
|
|
|
|
assert(is_path_simple(profile_curve_with_base));
|
|
|
|
|
|
if (show_curve_points)
|
|
color("Blue")move_copies(profile_curve_with_base) circle($fn=16);
|
|
|
|
|
|
// Draw fin profile
|
|
if (draw_profile) {
|
|
//left(425) drawProfile( points, true );
|
|
|
|
|
|
layer0 = expandPath(profile_curve_with_base,-2);
|
|
layer1 = expandPath(profile_curve_with_base,-8);
|
|
layer2 = expandPath(profile_curve_with_base,-15);
|
|
layer3 = expandPath(profile_curve_with_base,-30);
|
|
layer4 = expandPath(profile_curve_with_base,-40);
|
|
|
|
back(10) showDebugPath(layer0);
|
|
|
|
|
|
left(500) {
|
|
color("Red") polygon(profile_curve_with_base);
|
|
up(10) polygon(layer0);
|
|
up(20) color("Yellow") polygon(layer1);
|
|
up(30) color("Brown") polygon(layer2);
|
|
}
|
|
|
|
layers = [profile_curve_with_base,layer0,layer1,layer2,layer3,layer4];
|
|
|
|
left (800) color ("Green") polygon(profile_curve_with_base);
|
|
|
|
left (1000) color ("Green") shell(10) polygon(profile_curve_with_base);
|
|
}
|
|
|
|
|
|
|
|
// *****************
|
|
// * Fin Drawing *
|
|
// *****************
|
|
if ( build_fin )
|
|
scale([scale_factor, scale_factor, scale_factor])
|
|
buildFin( fin_thickness );
|
|
|
|
if ( build_box ) {
|
|
buildBox();
|
|
}
|
|
|
|
/**
|
|
* Render Mold
|
|
*/
|
|
if ( build_mold ) buildMold();
|
|
|
|
|
|
module buildCompletFin() {
|
|
difference(){
|
|
buildFin( fin_thickness );
|
|
//buildBox();
|
|
// Remove extra base
|
|
baseMask();
|
|
}
|
|
}
|
|
|
|
|
|
module buildBox() {
|
|
/*
|
|
left(80) {
|
|
xflip() {
|
|
finfit(fin_base+20, [1,1,0],false,false);
|
|
}
|
|
|
|
//up(20) tab_cut();
|
|
}
|
|
*/
|
|
|
|
}
|
|
module buildBoxMold() {
|
|
|
|
// To be defined
|
|
}
|
|
|
|
module baseMask() {
|
|
fwd(OFFSET) cube([fin_base*1.1,base_extra_thickness*1.1,fin_thickness*1.1],anchor=BACK);
|
|
}
|
|
|
|
|
|
|
|
module usBoxMask() {
|
|
left(80) color("Blue") usBox(fin_base+30,thickness = box_thickness+2*OFFSET,drill=false);
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
module bottomSupport() {
|
|
moldHeight = 10;
|
|
moldContour = expandPath(profile,mold_extra_width);
|
|
down(moldHeight)
|
|
linear_extrude (moldHeight) polygon(moldContour); // bottom support
|
|
}
|
|
*/
|
|
|
|
module support( part ) {
|
|
moldHeight = 10;
|
|
moldContour = expandPath(profile,mold_extra_width);
|
|
down( (part == "bottom" ? 1 : 0) * moldHeight)
|
|
linear_extrude (moldHeight) polygon(moldContour); // bottom support
|
|
}
|
|
|
|
/**
|
|
* Build mold
|
|
*
|
|
*/
|
|
module buildMold() {
|
|
// Bottom Mold
|
|
if (mold_part != "top") {
|
|
// Fin mold
|
|
difference() {
|
|
support(part="bottom");
|
|
usBoxMask();
|
|
buildCompletFin();
|
|
}
|
|
// Box mold
|
|
difference() {
|
|
left(80) finBoxMold( fin_base+30,part="bottom",skirt=false );
|
|
// Remove fin
|
|
buildCompletFin();
|
|
}
|
|
// Mold skirt
|
|
moldSkirt( part="bottom" );
|
|
}
|
|
// Top
|
|
if (mold_part != "bottom") xrot(printable ? 180 : 0 ) back( printable ? 60 : 0 ) {
|
|
difference(){
|
|
support(part="top");
|
|
usBoxMask();
|
|
buildCompletFin();
|
|
|
|
}
|
|
// Box mold
|
|
difference() {
|
|
left(80) finBoxMold( fin_base+30,part="top",skirt=false );
|
|
// Remove fin
|
|
//buildCompletFin();
|
|
}
|
|
// Mold skirt
|
|
down( fin_thickness * 3 ) moldSkirt( part="top" );
|
|
}
|
|
|
|
|
|
|
|
//up(50) buildCompletFin();
|
|
|
|
//left(300) linear_extrude (skirtHeight) polygon(moldSkirtRegion);
|
|
/*
|
|
if (mold_part != "top")
|
|
difference() {
|
|
case(mold_base_height,true);
|
|
// Piston
|
|
down(piston_depth-OFFSET) fwd(20) bottomInsert();
|
|
}
|
|
// Top Mold
|
|
if (mold_part != "bottom")
|
|
up(printable ? 0 : 60) fwd(printable ? fin_height+50 : 0) down(mold_base_height) mirror([0,0,printable ? 1 : 0 ]) {
|
|
difference() {
|
|
union() {
|
|
// case
|
|
case(mold_top_height,false);
|
|
// Piston
|
|
mirror([1,0,0])
|
|
down(mold_top_height+piston_depth-OFFSET) fwd(20) topPiston();
|
|
};
|
|
resin_escape(40);
|
|
}
|
|
}
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* Build the piston skirt
|
|
*
|
|
* @param part - Part could be 'top' or 'bottom'
|
|
*/
|
|
module moldSkirt( part ){
|
|
assert( part , "'part' parameter should be defined in mold skirt");
|
|
|
|
box_profile = move([-80,0],profileUS (fin_base+30));
|
|
finAndBoxProfile = path_merge_collinear(union([box_profile,profile]));
|
|
|
|
//if (part == "bottom") {
|
|
|
|
skirt( finAndBoxProfile, side = part ,moldThickness = 3 , angle = skirt_angle, moldDeep = fin_thickness );
|
|
//} else if (part == "top") {
|
|
|
|
|
|
//}
|
|
|
|
}
|
|
|
|
//moldSkirt(part="top");
|
|
|
|
|
|
|
|
|
|
|
|
module moldJunctionMask(moldThickness = 3,height,angle){
|
|
|
|
deviation = opp_ang_to_adj (height,angle);
|
|
right(moldThickness)
|
|
left(moldThickness/2)
|
|
down(OFFSET)
|
|
//fwd(60)
|
|
//back(moldThickness*2-0.5)
|
|
back(moldThickness*1.2-OFFSET )
|
|
color("Red")
|
|
prismoid(
|
|
size1=[fin_width/2-1.5*moldThickness, moldThickness*3+2*OFFSET],
|
|
size2=[fin_width/2+1*deviation+0*moldThickness, /*moldThickness/2*/moldThickness * 3+deviation],
|
|
h=height+OFFSET*3
|
|
);
|
|
}
|
|
|
|
module buildMoldSkirt( height,offset,thickness ) {
|
|
outside = expandPath(profile,offset);
|
|
inside = expandPath(profile,offset-thickness);
|
|
down(height) {
|
|
// Skirt
|
|
linear_extrude (height-thick/2) difference() {
|
|
polygon(outside);
|
|
polygon(inside);
|
|
};
|
|
difference() {
|
|
//union() {
|
|
intersection() {
|
|
ycopies(30,10,sp=[-100,0,0])
|
|
cube([fin_width*1.3,thickness,height]);
|
|
linear_extrude (height) polygon(outside);
|
|
};
|
|
up(height) buildCompletFin();
|
|
}
|
|
|
|
|
|
}
|
|
}
|
|
|
|
|
|
// *****************
|
|
// * Bottom insert *
|
|
// *****************
|
|
module bottomInsert() {
|
|
debug=true;
|
|
layer_profile = profile_curve_with_base;
|
|
skin( [ layer_profile,expandPath(layer_profile,3) ], z=[0,piston_depth], slices=0 )
|
|
up(OFFSET)
|
|
buildFinSide(true)
|
|
;
|
|
}
|
|
|
|
// *****************
|
|
// * Top piston *
|
|
// *****************
|
|
module topPiston() {
|
|
debug=true;
|
|
layer_profile = profile_curve_with_base;
|
|
difference() {
|
|
skin( [ layer_profile,expandPath(layer_profile,3) ], z=[0,piston_depth], slices=0 );
|
|
down(OFFSET)
|
|
buildFinSide(false);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Build fin
|
|
*
|
|
*/
|
|
module buildFin( thickness ) {
|
|
union() {
|
|
if (parts != "bottom") buildFinSide( thickness );
|
|
if (parts != "top") buildFinSide( thickness , true );
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Build fin side
|
|
*
|
|
* @param flip - Define it it is top or bottom fin side
|
|
*/
|
|
module buildFinSide(thickness,flip=false) {
|
|
|
|
//profile_curve_with_base1 = subdivide_path (profile_curve_with_base,500);
|
|
|
|
//if (false)
|
|
mirror([0,0,flip ? 1 : 0])
|
|
color(flip ? "Gray" : "LightGray")
|
|
ellipse_extrude( thickness / 2 /*,height=2*/,center=false,twist=-7)
|
|
//zrot(30)
|
|
polygon( profile_curve_with_base);
|
|
}
|
|
|
|
module resin_escape(length) {
|
|
color ("Blue") cylinder(h=length, r=resin_escape_diameter/2);
|
|
}
|
|
|
|
|
|
function addBase(path) = concat(path,[[fin_base,-base_extra_thickness],[0,-base_extra_thickness]]);
|
|
|
|
|
|
/**
|
|
* Draws a profile based on Bezier path points with optional debug visualization.
|
|
*
|
|
* @param points - Array of points defining the Bezier path.
|
|
* @param debug - Boolean flag to enable/disable debug visualization. Defaults to true.
|
|
*
|
|
* This module:
|
|
* - Calculates the closest point on the Bezier path to a fixed point.
|
|
* - Draws the Bezier path with debug information if debug is true.
|
|
* - Optionally shows spheres at specific points for debugging (currently commented out).
|
|
*/
|
|
module drawProfile( points,debug = true ){
|
|
|
|
|
|
debugPoint (start, "Start", "Red" );
|
|
debugPoint (top_point, "Top", "Blue" );
|
|
debugPoint (edge_point, "Edge", "Brown" );
|
|
debugPoint (counter_edge_point, "Counter Edge", "Brown" );
|
|
debugPoint (tail_point, "Tail", "Yellow" );
|
|
debugPoint (end_point, "End", "Yellow" );
|
|
|
|
//pt = [100,0];
|
|
//pos = bezpath_closest_point(points, pt);
|
|
//xy = bezpath_points(points,pos[0],pos[1]);
|
|
|
|
debug_bezier(points, N=3,width=1.2);
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|