Fix top mold skirt problem on us box

Readme.md

@@ -20,7 +20,7 @@ The box is designed using library [Fin Base](https://github.com/hrobeers/finbase
 [Understanding Kitesruf fins](https://24-7boardsports.com/understanding-kitesurf-twintip-board-fins/)
 
 
-## Measure models
+### Measure models
 
 Open web app [at](https://0x00019913.github.io/meshy/) and import it to get the volume.
 
@@ -31,6 +31,46 @@ To convert 21037 cubic millimeters (mm³) to deciliters (dl), you can use the co
 Therefore, 21037 cubic millimeters is equivalent to 0.21dl.
 
 
+### Materials 
+
+
+| Volume | Weight | Fiber Load | Résine  |
+| ------ | ------ | ---------- | ------- |
+| 100%   | x1.4   | 60%        | 40%     |
+| 21 cm3 | 29.4g  | 17.64 g    | 11.76 g |
+
+
+## Surf fin 10 inch
+
+
+| Volume | Weight | Fiber Load | Résine  |
+| ------ | ------ | ---------- | ------- |
+| 100%   | x1.4   | 60%        | 40%     |
+| 207 cm3 | 290g  | 174 g      | 116 g   |
+
+#### Pin
+
+The pin slides into a groove in the US Box fin slot, allowing the fin to move forward or backward to adjust the fin's position for different conditions or board feel.
+
+US Box require a pin of diameter 4.76mm (3/16 inch) per L 14.28 mm (9/16inch) 
+
+### Screw
+
+The screw for securing single fins is often 10-32 x ¾” (or 5mm x 19mm).
+It's usually a slotted screw designed to go through the fin and into the square plate.
+
+
+- Stainless Steel Longboard Fin Screw & Plate 
+- [3/6Pcs Stainless Steel Surfboard Fin Screw M4 Surf](https://www.aliexpress.com/item/1005005128486923.html)  R$30.39
+- [Copper Pin for 6.5/8/9/9.5/10/12 Inch Surf Fin SUP Fin Water Sports](https://www.aliexpress.com/item/1005003301708931.html) R$ 19.22 + 25.73 
+
+
+### Square Washer (Plate)
+
+Dimensions: Commonly about ½” x ½” (or 14mm x 14mm), with a thickness of about 0.15" (4mm).
+This plate spreads the load of the screw over a larger area, ensuring a secure hold.
+
+
 ## Required Material
 
 - Durcisseur : Correspondant à la résine choisie.

Surf-Fins-10inch.json

@@ -179,16 +179,16 @@
             "mirror_vec": "[1, 1, 0]",
             "mold_base_height": "10",
             "mold_extra_width": "15",
-            "mold_part": "bottom",
+            "mold_part": "top",
             "mold_piston_height": "10",
             "mold_top_height": "5",
-            "partition": "none",
+            "partition": "high",
             "parts": "all",
             "pin_back": "9",
             "pin_depth": "16.399999999999999",
             "pin_dia": "3",
             "piston_depth": "5",
-            "printable": "false",
+            "printable": "true",
             "resin_escape_diameter": "4",
             "scale_factor": "1",
             "screw_dia": "4.5",
@@ -200,6 +200,119 @@
             "tab_height": "13",
             "thick": "9.1999999999999993",
             "thick_cut": "1"
+        },
+        "New set 5": {
+            "$fn": "64",
+            "base_extra_thickness": "20",
+            "base_tickness": "8",
+            "box_thickness": "9.5999999999999996",
+            "build_box": "false",
+            "build_fin": "true",
+            "build_mold": "false",
+            "draw_profile": "false",
+            "fin_back_angle": "20",
+            "fin_back_height": "30",
+            "fin_back_strength": "30",
+            "fin_back_widthdraw": "20",
+            "fin_base": "130",
+            "fin_counter_angle": "30",
+            "fin_counter_strength": "10",
+            "fin_edge_angle": "30",
+            "fin_edge_strength": "30",
+            "fin_edge_withdraw": "20",
+            "fin_end_angle": "110",
+            "fin_end_strength": "30",
+            "fin_height": "254",
+            "fin_start_angle": "70",
+            "fin_sweep": "25",
+            "fin_thickness": "9",
+            "fin_top_withdraw": "35",
+            "fin_width": "270",
+            "fin_width_tip": "5",
+            "height": "25",
+            "merge_holes_diameter": "6",
+            "mirror_vec": "[1, 1, 0]",
+            "mold_base_height": "10",
+            "mold_extra_width": "15",
+            "mold_part": "all",
+            "mold_piston_height": "10",
+            "mold_top_height": "5",
+            "partition": "none",
+            "parts": "all",
+            "pin_back": "9",
+            "pin_depth": "16.399999999999999",
+            "pin_dia": "3",
+            "piston_depth": "5",
+            "printable": "true",
+            "resin_escape_diameter": "4",
+            "scale_factor": "1",
+            "screw_dia": "4.5",
+            "screw_pos": "9.5999999999999996",
+            "show_curve_points": "false",
+            "show_debug_layers": "false",
+            "skirt_angle": "80",
+            "start": "[0, 0]",
+            "tab_height": "13",
+            "thick": "9.1999999999999993",
+            "thick_cut": "1",
+            "version": "0.9b"
+        },
+        "New set 6": {
+            "$fn": "64",
+            "base_extra_thickness": "20",
+            "base_tickness": "8",
+            "box_offset": "80",
+            "box_thickness": "9.5999999999999996",
+            "build_box": "false",
+            "build_fin": "false",
+            "build_mold": "true",
+            "draw_profile": "false",
+            "fin_back_angle": "20",
+            "fin_back_height": "30",
+            "fin_back_strength": "30",
+            "fin_back_widthdraw": "20",
+            "fin_base": "130",
+            "fin_counter_angle": "30",
+            "fin_counter_strength": "10",
+            "fin_edge_angle": "30",
+            "fin_edge_strength": "30",
+            "fin_edge_withdraw": "20",
+            "fin_end_angle": "110",
+            "fin_end_strength": "30",
+            "fin_height": "254",
+            "fin_start_angle": "70",
+            "fin_sweep": "25",
+            "fin_thickness": "9",
+            "fin_top_withdraw": "35",
+            "fin_width": "270",
+            "fin_width_tip": "5",
+            "height": "25",
+            "merge_holes_diameter": "6",
+            "mirror_vec": "[1, 1, 0]",
+            "mold_base_height": "10",
+            "mold_extra_width": "15",
+            "mold_part": "top",
+            "mold_piston_height": "10",
+            "mold_top_height": "5",
+            "partition": "none",
+            "parts": "all",
+            "pin_back": "9",
+            "pin_depth": "16.399999999999999",
+            "pin_dia": "3",
+            "piston_depth": "5",
+            "printable": "true",
+            "resin_escape_diameter": "4",
+            "scale_factor": "1",
+            "screw_dia": "4.5",
+            "screw_pos": "9.5999999999999996",
+            "show_curve_points": "false",
+            "show_debug_layers": "false",
+            "skirt_angle": "80",
+            "start": "[0, 0]",
+            "tab_height": "13",
+            "thick": "9.1999999999999993",
+            "thick_cut": "1",
+            "version": "0.9b"
         }
     }
 }

Surf-Fins-10inch.scad

@@ -134,6 +134,10 @@ pin_back  = 9;
 //thick_cut = 0.001*1000;
 thick_cut = 1;
 
+// Offset the box to fit the fin
+box_offset = 80;
+
+
 // ---------------------*/
 /*     [Debugging]      */
 // ---------------------*/
@@ -160,6 +164,9 @@ parts           = "all";      // [all, top, bottom]
 
 
 mold_part       = "all";   // [all, top, bottom]
+
+version         ="0.9b";
+
 // Scaling
 scale_factor    = 1.0; // [0.1:0.1:2] 
 
@@ -231,66 +238,25 @@ points = flatten([
 profile_curve_with_base  = translate_path( addBase(asCurve(points,32)),-fin_base/2,0 );
 profile  = translate_path( asCurve(points,32),-fin_base/2,0 );
 
-//profile_curve_with_base  = translate_path( asCurve(points,32),-fin_base/2,0 );
-//profile_curve_with_base  = resample_path(translate_path( asCurve(points,32),-fin_base/2,0 ),64);
-
 assert(is_path_simple(profile_curve_with_base));
 
-
-if (show_curve_points)
-    color("Blue")move_copies(profile_curve_with_base) circle($fn=16);
-
-
-// Draw fin profile
-if (draw_profile) {
-    //left(425) drawProfile( points, true  );
-    
-    
-    layer0 = expandPath(profile_curve_with_base,-2);
-    layer1 = expandPath(profile_curve_with_base,-8);
-    layer2 = expandPath(profile_curve_with_base,-15);
-    layer3 = expandPath(profile_curve_with_base,-30);
-    layer4 = expandPath(profile_curve_with_base,-40);
-    
-    back(10) showDebugPath(layer0);
-    
-    
-    left(500) {
-        color("Red") polygon(profile_curve_with_base);
-        up(10) polygon(layer0);
-        up(20) color("Yellow") polygon(layer1);
-        up(30) color("Brown") polygon(layer2);
-    }
-    
-    layers = [profile_curve_with_base,layer0,layer1,layer2,layer3,layer4];
-    
-    left (800) color ("Green") polygon(profile_curve_with_base);
-    
-       left (1000) color ("Green") shell(10) polygon(profile_curve_with_base);
-}    
-
-
-
 // *****************
 // *  Fin Drawing  *
 // *****************
 if ( build_fin ) 
-    scale([scale_factor, scale_factor, scale_factor]) 
+    scale([scale_factor, scale_factor, scale_factor]) {
-        buildFin( fin_thickness );
+        union() {
-
+            buildCompletFin();
-if ( build_box ) {
+            left(box_offset) usBox(fin_base+30);
-      buildBox();
+        }
     }        
         
 /**
  * Render Mold
  */
-if ( build_mold )              //buildMold();    
+if ( build_mold )            
-{
-
     difference(){
         buildMold();
-        //cube([100,200,30]);
         if (partition=="low")
              partitionMask(false);
         if (partition=="high")
@@ -298,16 +264,13 @@ if ( build_mold )              //buildMold();
              
     }                
 
-}
+/**
-
+ * Build complete fin
-
+ */
-
 module buildCompletFin() {
     difference(){
-        buildFin( fin_thickness );
+        buildFin( fin_thickness );  // Fin 
-        //buildBox();
+        baseMask();                 // Remove extra base
-        // Remove extra base
-        baseMask();
     }
 }
 
@@ -317,7 +280,9 @@ module baseMask() {
 
 
 module usBoxMask() {
-    left(80) color("Blue") usBox(fin_base+30,thickness = box_thickness+2*OFFSET,drill=false);
+    left(box_offset) 
+        color("Blue") 
+            usBox(fin_base+30,thickness = box_thickness+2*OFFSET,drill=false);
 }
 
 
@@ -327,7 +292,7 @@ module usBoxMask() {
  */
 module buildMold() {
     // Bottom Mold
-    if (mold_part != "top") right( printable ? 120 : 0 ) {
+    if (mold_part != "top") right( printable ? 120 : 0 ) union() {
         // Fin mold
         difference() {
             support(part="bottom");
@@ -336,7 +301,8 @@ module buildMold() {
         }
         // Box mold
         difference() {
-            left(80)  finBoxMold( fin_base+30,part="bottom",skirt=false );
+            left(box_offset)  
+                finBoxMold( fin_base+30,part="bottom",skirt=false );
             // Remove fin
             buildCompletFin(); 
         }
@@ -344,7 +310,7 @@ module buildMold() {
         moldSkirt( part="bottom" );
     }
     // Top
-    if (mold_part != "bottom") /*up(1* 150)*/ left( printable ? 120 : 0 ) yrot(printable ? 180 : 0 )   {
+    if (mold_part != "bottom") /*up(1* 150)*/ left( printable ? 120 : 0 ) yrot(printable ? 180 : 0 )   union() {
         difference(){
             support(part="top");
             usBoxMask();
@@ -353,12 +319,19 @@ module buildMold() {
         }    
         // Box mold
         difference() {
-            left(80)  finBoxMold( fin_base+30,part="top",skirt=false );
+            left(box_offset)  
+                finBoxMold( fin_base+30,part="top",skirt=false );
             // Remove fin
             buildCompletFin(); 
         }
         // Mold skirt
-        down( fin_thickness * 3 ) moldSkirt( part="top" );    
+        difference() 
+        {
+            down( fin_thickness * 3 ) moldSkirt( part="top" ); // Inclinded Skirt
+            back(0.65)
+                cube([250,40,9.6],anchor=BACK); // Remove skirt on us box side
+        }    
+        
     }
      
 }
@@ -387,35 +360,18 @@ module moldSkirt( part ){
     
     box_profile         = move([-80,0],profileUS (fin_base+30));
     finAndBoxProfile    = path_merge_collinear(union([box_profile,profile]));    
-    
-    //if (part == "bottom") {
-
     moldHeight          = fin_thickness * 3;
     
     up (part=="top" ? moldHeight : 0 )
         skirt( finAndBoxProfile, side = part ,moldThickness = 3 , angle = skirt_angle, moldDeep = fin_thickness );
-    //} else if (part == "top") {
-        
-    
-    //}
-    
 }
 
-//moldSkirt(part="top");
-
-
-
-
-
 module moldJunctionMask(moldThickness = 3,height,angle){
 
     deviation = opp_ang_to_adj (height,angle);
     right(moldThickness)
     left(moldThickness/2)
-    down(OFFSET)
+    down( OFFSET ) back( moldThickness*1.2 - OFFSET )
-    //fwd(60)
-    //back(moldThickness*2-0.5)
-    back(moldThickness*1.2-OFFSET )
         color("Red") 
             prismoid(
                 size1=[fin_width/2-1.5*moldThickness, moldThickness*3+2*OFFSET], 
@@ -513,10 +469,10 @@ module partitionMask(inverse = false) {
     up(10)
     partition_mask(
                     w=fin_height/2*1.5, 
-                    h=60,           // height
+                    h=80,           // height
                     l=fin_width*3, 
-                    cutpath="comb",
+                    cutpath="sinewave",
-                    spread=3,
+                    //spread=0.1,
                     inverse=inverse,
                     anchor=FRONT
     );
@@ -554,8 +510,18 @@ module drawProfile( points,debug = true ){
     debug_bezier(points, N=3,width=1.2);
 }
 
-
+echo ("****************************");
-
+echo ("** Build              **");
+echo ("****************************");
+echo (str("filename :","    surf-fins-10inch-",mold_part,"-",partition,"_",version,".stl","       "));
+
+// Draw fin profile
+if (draw_profile)  
+    back(10) right(350) showDebugPath(profile_curve_with_base);
+
+// Show curve points    
+if (show_curve_points)
+    color("Blue")move_copies(profile_curve_with_base) circle($fn=16);
 
 
     

lib/finbox_us.scad

@@ -1,7 +1,6 @@
 
-include <BOSL2/std.scad>;
+include <BOSL2/std.scad>
-include <BOSL2/beziers.scad>;
+include <BOSL2/beziers.scad>
-
 include <Round-Anything/polyround.scad>
 
 
@@ -42,7 +41,12 @@ function profileUS( length,height=23,tabHeight = 8,tabLength = 20, backRounding
         [ -tabLength                    , -tabHeight    ,1]             // 5
     ]);
 
-
+/**
+ * US Box 
+ *
+ * @param length : Length of the fin base. backExtra and tabLength will be added to have the full length
+ *
+ */
 module usBox( length, height=23, thickness = 9, tabLength = 20,pinDiameter = 5,pinInset = 8, backExtra = 10,cutReduction = 0.5,screw_diameter=4.5,drill = true, color="Grey" ) {
     color(color) mirror_copy([0,0,1], offset=-OFFSET) difference() {
         linear_extrude ( height = thickness/2 ) boxProfileUS( length, tabLength = tabLength, height=height, backExtra=backExtra );