Fin 10 inch mark name and version

Surf-Fins-10inch.json

@@ -259,9 +259,9 @@
             "box_offset": "80",
             "box_thickness": "9.5999999999999996",
             "build_box": "false",
-            "build_fin": "false",
+            "build_fin": "true",
             "build_mold": "false",
-            "draw_profile": "true",
+            "draw_profile": "false",
             "fin_back_angle": "20",
             "fin_back_height": "30",
             "fin_back_strength": "30",
@@ -307,6 +307,62 @@
             "thick": "9.1999999999999993",
             "thick_cut": "1",
             "version": "0.9b"
+        },
+        "New set 7": {
+            "$fn": "64",
+            "base_extra_thickness": "20",
+            "base_tickness": "8",
+            "box_offset": "80",
+            "box_thickness": "9.5999999999999996",
+            "build_box": "false",
+            "build_fin": "false",
+            "build_mold": "true",
+            "draw_profile": "false",
+            "fin_back_angle": "20",
+            "fin_back_height": "30",
+            "fin_back_strength": "30",
+            "fin_back_widthdraw": "20",
+            "fin_base": "130",
+            "fin_counter_angle": "30",
+            "fin_counter_strength": "10",
+            "fin_edge_angle": "30",
+            "fin_edge_strength": "30",
+            "fin_edge_withdraw": "20",
+            "fin_end_angle": "110",
+            "fin_end_strength": "30",
+            "fin_height": "254",
+            "fin_start_angle": "70",
+            "fin_sweep": "25",
+            "fin_thickness": "9",
+            "fin_top_withdraw": "35",
+            "fin_width": "270",
+            "fin_width_tip": "5",
+            "height": "25",
+            "merge_holes_diameter": "6",
+            "mirror_vec": "[1, 1, 0]",
+            "mold_base_height": "10",
+            "mold_extra_width": "15",
+            "mold_part": "top",
+            "mold_piston_height": "10",
+            "mold_top_height": "5",
+            "partition": "none",
+            "parts": "all",
+            "pin_back": "9",
+            "pin_depth": "16.399999999999999",
+            "pin_dia": "3",
+            "piston_depth": "5",
+            "printable": "true",
+            "scale_factor": "1",
+            "screw_dia": "4.5",
+            "screw_pos": "9.5999999999999996",
+            "show_curve_points": "false",
+            "show_debug_layers": "false",
+            "skirt_angle": "80",
+            "start": "[0, 0]",
+            "tab_height": "13",
+            "thick": "9.1999999999999993",
+            "thick_cut": "1",
+            "version": "0.9c"
         }
     }
 }

Surf-Fins-10inch.scad

@@ -165,7 +165,9 @@ parts           = "all";      // [all, top, bottom]
 
 mold_part       = "all";   // [all, top, bottom]
 
-version         ="0.9b";
+name            = "SurfFin";
+name_suffix     = "10''";
+version         = "0.9c";
 
 // Scaling
 scale_factor    = 1.0; // [0.1:0.1:2] 
@@ -299,6 +301,7 @@ module buildMold() {
             usBoxMask();
             buildCompletFin();
         }
+
         // Box mold
         difference() {
             left(box_offset)  
@@ -342,10 +345,17 @@ module support( part ) {
     moldContour =  expandPath(profile,mold_extra_width);
     if (part == "bottom") {
         down( moldHeight ) 
-            linear_extrude (moldHeight) polygon(moldContour);  // bottom support
+            difference() {
+                linear_extrude (moldHeight) polygon(moldContour);  // bottom support
+            
+                down(1) left(40) back(30) mirror([-1,0,0]) versionMark(12);
+            }
     } else if (part == "top") {
         //linear_extrude (moldHeight) polygon(moldContour);  // top support
         linear_extrude (moldHeight) polygon(profile);  // top support
+            translate([60,30,moldHeight-1])
+                //mirror([0,0,0]) 
+                    versionMark(12);
     }
 }
 
@@ -486,14 +496,15 @@ module drawProfile( points,debug = true ){
     debug_bezier(points, N=3,width=1.2);
 }
 
+module versionMark(size = 18) {
+    linear_extrude(3) color("Orange") {
+        text(str(name,"[",name_suffix,"]"),size=size,font="Geneva",halign="right");
+        fwd(18) text(str(version),size=size * (15/18),font="Geneva",halign="right");
+    }
+}
 
 
 
-echo ("****************************");
-echo ("** Build              **");
-echo ("****************************");
-echo (str("filename :","    surf-fins-10inch-",mold_part,"-",partition,"_",version,".stl","       "));
-
 // Draw fin profile
 if (draw_profile) drawProfile(points);
 
@@ -502,6 +513,10 @@ if (draw_profile) drawProfile(points);
 if (show_curve_points)
     color("Blue")move_copies(profile_curve_with_base) circle($fn=16);
 
+echo ("****************************");
+echo ("** Build              **");
+echo ("****************************");
+echo (str("filename :","    surf-fins-10inch-",mold_part,"-",partition,"_",version,".stl","       "));
 
     
     

doc/attempt.md

@@ -0,0 +1,14 @@
+# Attempt
+
+
+## Kiteboard Fin 
+
+
+Resin 20g
+Hardener 8g 
+10drops Azul Basico 
+
+Desmoldante Carnauba
+Pinceau multiuse
+2 couches de fibre de verre
+ 

lib/finbox_us.scad

@@ -8,6 +8,11 @@ $fn=64;
 
 OFFSET=0.01;
 
+PIN_DIAMETER=4.76;              // 3/16 inch
+PIN_LENGTH = PIN_DIAMETER * 3;  // 9/16inch
+
+
+
 /**
  * US Box profile
  
@@ -47,19 +52,28 @@ function profileUS( length,height=23,tabHeight = 8,tabLength = 20, backRounding
  * @param length : Length of the fin base. backExtra and tabLength will be added to have the full length
  *
  */
-module usBox( length, height=23, thickness = 9, tabLength = 20,pinDiameter = 5,pinInset = 8, backExtra = 10,cutReduction = 0.5,screw_diameter=4.5,drill = true, color="Grey" ) {
+module usBox( length, height=23, thickness = 9, tabLength = 20,pinDiameter = 5,pinInset = 8, backExtra = 10,cutReduction = 0.5,screw_diameter=4.5,drill = true, color="Grey", showPin = false ) {
-    color(color) mirror_copy([0,0,1], offset=-OFFSET) difference() {
+    color(color) mirror_copy([0,0,1], offset=-OFFSET) 
-        linear_extrude ( height = thickness/2 ) boxProfileUS( length, tabLength = tabLength, height=height, backExtra=backExtra );
+    difference() {
+        linear_extrude ( height = thickness/2 ) color(color) boxProfileUS( length, tabLength = tabLength, height=height, backExtra=backExtra );
         // Thickness cut
         translate([length + backExtra + OFFSET,-OFFSET,thickness/2-cutReduction+OFFSET])
             thickness_cut( cutReduction , height );
         // Pin drill
-        if (drill) translate([length+backExtra-pinInset,-height+pinInset,0]) color("Red")
+        if ( drill ) 
-            cyl(h=thickness*2,d=pinDiameter,$fn=32);
+            translate([length+backExtra-pinInset,-height+pinInset,0])  
+                color("Red")
+                    cyl(h=thickness*2,d=pinDiameter,$fn=32);
             
         // Screw Cut
-        if (drill) translate ([-tabLength/2,-height/2+OFFSET,0]) color ("Red") cyl( h=height, d=screw_diameter, orient=FRONT );    
+        if ( drill ) 
+            translate ([-tabLength/2,-height/2+OFFSET,0]) 
+                color ("Red") cyl( h=height, d=screw_diameter, orient=FRONT );    
     }
+    if (showPin)
+        translate([length+backExtra-pinInset,-height+pinInset,0])
+            cyl (h=PIN_LENGTH,d=PIN_DIAMETER);
+    
 }
 
 
@@ -126,20 +140,6 @@ module usBoxMold( length, height=23, thickness = 9, moldThickness = 4,tabLength
     
 }
 
-if ( false ) {
-    // Bottom
-   down(0) back(0) usBoxMold( 130 ,part="bottom"  ,skirt=false );
-   // Top
-   down(-50) back(0) usBoxMold( 130  ,part="top"     ,skirt=false );
-
-   down(50) back(0) usBoxMold( 130  ,part="bottom"     ,skirt=true );
-   
-   
-   //down(0) back(0) usBox(130,height=23,drill=false,color="Green");
-}  
-
-
-
 
 module finBoxMold( length, finLength=-1, skirtAngle = 80, part="bottom", skirt = true) {
 
@@ -166,9 +166,24 @@ module thickness_cut(thickness,height) {
 
 //back (30) usBoxMold (130,part="top",skirt=false);
 
+
+// US Box
+
+//usBox(130,height=23,drill=true,color="White",showPin=false);
+
 //down(0) back(0) usBox(130,height=23,drill=false,color="Green");
 
 
- 
+ if ( false ) {
+    // Bottom
+   down(0) back(0) usBoxMold( 130 ,part="bottom"  ,skirt=false );
+   // Top
+   down(-50) back(0) usBoxMold( 130  ,part="top"     ,skirt=false );
+
+   down(50) back(0) usBoxMold( 130  ,part="bottom"     ,skirt=true );
+   
+   
+   //down(0) back(0) usBox(130,height=23,drill=false,color="Green");
+}