Initial commit
This commit is contained in:
commit
bbbae6a651
3648
Configuration.h
Executable file
3648
Configuration.h
Executable file
File diff suppressed because it is too large
Load Diff
4571
Configuration_adv.h
Executable file
4571
Configuration_adv.h
Executable file
File diff suppressed because it is too large
Load Diff
5
Readme.md
Normal file
5
Readme.md
Normal file
@ -0,0 +1,5 @@
|
|||||||
|
# Marlin Firmware
|
||||||
|
|
||||||
|
Marlin Firware for my Ender 3 Neo
|
||||||
|
|
||||||
|
|
||||||
247
config.ini
Executable file
247
config.ini
Executable file
@ -0,0 +1,247 @@
|
|||||||
|
#
|
||||||
|
# Marlin Firmware
|
||||||
|
# config.ini - Options to apply before the build
|
||||||
|
#
|
||||||
|
[config:base]
|
||||||
|
#
|
||||||
|
# ini_use_config - A comma-separated list of actions to apply to the Configuration files.
|
||||||
|
# The actions will be applied in the listed order.
|
||||||
|
# - none
|
||||||
|
# Ignore this file and don't apply any configuration options
|
||||||
|
#
|
||||||
|
# - base
|
||||||
|
# Just apply the options in config:base to the configuration
|
||||||
|
#
|
||||||
|
# - minimal
|
||||||
|
# Just apply the options in config:minimal to the configuration
|
||||||
|
#
|
||||||
|
# - all
|
||||||
|
# Apply all 'config:*' sections in this file to the configuration
|
||||||
|
#
|
||||||
|
# - another.ini
|
||||||
|
# Load another INI file with a path relative to this config.ini file (i.e., within Marlin/)
|
||||||
|
#
|
||||||
|
# - https://me.myserver.com/path/to/configs
|
||||||
|
# Fetch configurations from any URL.
|
||||||
|
#
|
||||||
|
# - example/Creality/Ender-5 Plus @ bugfix-2.1.x
|
||||||
|
# Fetch example configuration files from the MarlinFirmware/Configurations repository
|
||||||
|
# https://raw.githubusercontent.com/MarlinFirmware/Configurations/bugfix-2.1.x/config/examples/Creality/Ender-5%20Plus/
|
||||||
|
#
|
||||||
|
# - example/default @ release-2.0.9.7
|
||||||
|
# Fetch default configuration files from the MarlinFirmware/Configurations repository
|
||||||
|
# https://raw.githubusercontent.com/MarlinFirmware/Configurations/release-2.0.9.7/config/default/
|
||||||
|
#
|
||||||
|
# - [disable]
|
||||||
|
# Comment out all #defines in both Configuration.h and Configuration_adv.h. This is useful
|
||||||
|
# to start with a clean slate before applying any config: options, so only the options explicitly
|
||||||
|
# set in config.ini will be enabled in the configuration.
|
||||||
|
#
|
||||||
|
# - [flatten] (Not yet implemented)
|
||||||
|
# Produce a flattened set of Configuration.h and Configuration_adv.h files with only the enabled
|
||||||
|
# #defines and no comments. A clean look, but context-free.
|
||||||
|
#
|
||||||
|
ini_use_config = none
|
||||||
|
|
||||||
|
# Load all config: sections in this file
|
||||||
|
;ini_use_config = all
|
||||||
|
# Disable everything and apply subsequent config:base options
|
||||||
|
;ini_use_config = [disable], base
|
||||||
|
# Load config file relative to Marlin/
|
||||||
|
;ini_use_config = another.ini
|
||||||
|
# Download configurations from GitHub
|
||||||
|
;ini_use_config = example/Creality/Ender-5 Plus @ bugfix-2.1.x
|
||||||
|
# Download configurations from your server
|
||||||
|
;ini_use_config = https://me.myserver.com/path/to/configs
|
||||||
|
# Evaluate config:base and do a config dump
|
||||||
|
;ini_use_config = base
|
||||||
|
;config_export = 2
|
||||||
|
|
||||||
|
[config:minimal]
|
||||||
|
motherboard = BOARD_RAMPS_14_EFB
|
||||||
|
serial_port = 0
|
||||||
|
baudrate = 250000
|
||||||
|
|
||||||
|
use_watchdog = on
|
||||||
|
thermal_protection_hotends = on
|
||||||
|
thermal_protection_hysteresis = 4
|
||||||
|
thermal_protection_period = 40
|
||||||
|
|
||||||
|
bufsize = 4
|
||||||
|
block_buffer_size = 16
|
||||||
|
max_cmd_size = 96
|
||||||
|
|
||||||
|
extruders = 1
|
||||||
|
temp_sensor_0 = 1
|
||||||
|
|
||||||
|
temp_hysteresis = 3
|
||||||
|
heater_0_mintemp = 5
|
||||||
|
heater_0_maxtemp = 275
|
||||||
|
preheat_1_temp_hotend = 180
|
||||||
|
|
||||||
|
bang_max = 255
|
||||||
|
pidtemp = on
|
||||||
|
pid_k1 = 0.95
|
||||||
|
pid_max = 255
|
||||||
|
pid_functional_range = 10
|
||||||
|
|
||||||
|
default_kp = 22.20
|
||||||
|
default_ki = 1.08
|
||||||
|
default_kd = 114.00
|
||||||
|
|
||||||
|
x_driver_type = A4988
|
||||||
|
y_driver_type = A4988
|
||||||
|
z_driver_type = A4988
|
||||||
|
e0_driver_type = A4988
|
||||||
|
|
||||||
|
x_bed_size = 200
|
||||||
|
x_min_pos = 0
|
||||||
|
x_max_pos = X_BED_SIZE
|
||||||
|
|
||||||
|
y_bed_size = 200
|
||||||
|
y_min_pos = 0
|
||||||
|
y_max_pos = Y_BED_SIZE
|
||||||
|
|
||||||
|
z_min_pos = 0
|
||||||
|
z_max_pos = 200
|
||||||
|
|
||||||
|
x_home_dir = -1
|
||||||
|
y_home_dir = -1
|
||||||
|
z_home_dir = -1
|
||||||
|
|
||||||
|
x_min_endstop_hit_state = HIGH
|
||||||
|
y_min_endstop_hit_state = HIGH
|
||||||
|
z_min_endstop_hit_state = HIGH
|
||||||
|
|
||||||
|
default_axis_steps_per_unit = { 80, 80, 400, 500 }
|
||||||
|
axis_relative_modes = { false, false, false, false }
|
||||||
|
default_max_feedrate = { 300, 300, 5, 25 }
|
||||||
|
default_max_acceleration = { 3000, 3000, 100, 10000 }
|
||||||
|
|
||||||
|
homing_feedrate_mm_m = { (50*60), (50*60), (4*60) }
|
||||||
|
homing_bump_divisor = { 2, 2, 4 }
|
||||||
|
|
||||||
|
x_enable_on = 0
|
||||||
|
y_enable_on = 0
|
||||||
|
z_enable_on = 0
|
||||||
|
e_enable_on = 0
|
||||||
|
|
||||||
|
invert_x_dir = false
|
||||||
|
invert_y_dir = true
|
||||||
|
invert_z_dir = false
|
||||||
|
invert_e0_dir = false
|
||||||
|
|
||||||
|
step_state_e = HIGH
|
||||||
|
step_state_x = HIGH
|
||||||
|
step_state_y = HIGH
|
||||||
|
step_state_z = HIGH
|
||||||
|
|
||||||
|
disable_x = off
|
||||||
|
disable_y = off
|
||||||
|
disable_z = off
|
||||||
|
disable_e = off
|
||||||
|
|
||||||
|
proportional_font_ratio = 1.0
|
||||||
|
default_nominal_filament_dia = 1.75
|
||||||
|
|
||||||
|
junction_deviation_mm = 0.013
|
||||||
|
|
||||||
|
default_acceleration = 3000
|
||||||
|
default_travel_acceleration = 3000
|
||||||
|
default_retract_acceleration = 3000
|
||||||
|
|
||||||
|
default_minimumfeedrate = 0.0
|
||||||
|
default_mintravelfeedrate = 0.0
|
||||||
|
|
||||||
|
minimum_planner_speed = 0.05
|
||||||
|
min_steps_per_segment = 6
|
||||||
|
default_minsegmenttime = 20000
|
||||||
|
|
||||||
|
[config:basic]
|
||||||
|
bed_overshoot = 10
|
||||||
|
busy_while_heating = on
|
||||||
|
default_ejerk = 5.0
|
||||||
|
default_keepalive_interval = 2
|
||||||
|
default_leveling_fade_height = 0.0
|
||||||
|
disable_other_extruders = on
|
||||||
|
display_charset_hd44780 = JAPANESE
|
||||||
|
eeprom_boot_silent = on
|
||||||
|
eeprom_chitchat = on
|
||||||
|
endstoppullups = on
|
||||||
|
extrude_maxlength = 200
|
||||||
|
extrude_mintemp = 170
|
||||||
|
host_keepalive_feature = on
|
||||||
|
hotend_overshoot = 15
|
||||||
|
jd_handle_small_segments = on
|
||||||
|
lcd_info_screen_style = 0
|
||||||
|
lcd_language = en
|
||||||
|
max_bed_power = 255
|
||||||
|
mesh_inset = 0
|
||||||
|
min_software_endstops = on
|
||||||
|
max_software_endstops = on
|
||||||
|
min_software_endstop_x = on
|
||||||
|
min_software_endstop_y = on
|
||||||
|
min_software_endstop_z = on
|
||||||
|
max_software_endstop_x = on
|
||||||
|
max_software_endstop_y = on
|
||||||
|
max_software_endstop_z = on
|
||||||
|
preheat_1_fan_speed = 0
|
||||||
|
preheat_1_label = "PLA"
|
||||||
|
preheat_1_temp_bed = 70
|
||||||
|
prevent_cold_extrusion = on
|
||||||
|
prevent_lengthy_extrude = on
|
||||||
|
printjob_timer_autostart = on
|
||||||
|
probing_margin = 10
|
||||||
|
show_bootscreen = on
|
||||||
|
soft_pwm_scale = 0
|
||||||
|
string_config_h_author = "(none, default config)"
|
||||||
|
temp_bed_hysteresis = 3
|
||||||
|
temp_bed_residency_time = 10
|
||||||
|
temp_bed_window = 1
|
||||||
|
temp_residency_time = 10
|
||||||
|
temp_window = 1
|
||||||
|
validate_homing_endstops = on
|
||||||
|
xy_probe_feedrate = (133*60)
|
||||||
|
z_clearance_between_probes = 5
|
||||||
|
z_clearance_deploy_probe = 10
|
||||||
|
z_clearance_multi_probe = 5
|
||||||
|
|
||||||
|
[config:advanced]
|
||||||
|
arc_support = on
|
||||||
|
auto_report_temperatures = on
|
||||||
|
autotemp = on
|
||||||
|
autotemp_oldweight = 0.98
|
||||||
|
bed_check_interval = 5000
|
||||||
|
default_stepper_timeout_sec = 120
|
||||||
|
default_volumetric_extruder_limit = 0.00
|
||||||
|
disable_idle_x = on
|
||||||
|
disable_idle_y = on
|
||||||
|
disable_idle_z = on
|
||||||
|
disable_idle_e = on
|
||||||
|
e0_auto_fan_pin = -1
|
||||||
|
encoder_100x_steps_per_sec = 80
|
||||||
|
encoder_10x_steps_per_sec = 30
|
||||||
|
encoder_rate_multiplier = on
|
||||||
|
extended_capabilities_report = on
|
||||||
|
extruder_auto_fan_speed = 255
|
||||||
|
extruder_auto_fan_temperature = 50
|
||||||
|
fanmux0_pin = -1
|
||||||
|
fanmux1_pin = -1
|
||||||
|
fanmux2_pin = -1
|
||||||
|
faster_gcode_parser = on
|
||||||
|
homing_bump_mm = { 5, 5, 2 }
|
||||||
|
max_arc_segment_mm = 1.0
|
||||||
|
min_arc_segment_mm = 0.1
|
||||||
|
min_circle_segments = 72
|
||||||
|
n_arc_correction = 25
|
||||||
|
serial_overrun_protection = on
|
||||||
|
slowdown = on
|
||||||
|
slowdown_divisor = 2
|
||||||
|
temp_sensor_bed = 0
|
||||||
|
thermal_protection_bed_hysteresis = 2
|
||||||
|
thermocouple_max_errors = 15
|
||||||
|
tx_buffer_size = 0
|
||||||
|
watch_bed_temp_increase = 2
|
||||||
|
watch_bed_temp_period = 60
|
||||||
|
watch_temp_increase = 2
|
||||||
|
watch_temp_period = 20
|
||||||
Loading…
x
Reference in New Issue
Block a user